This section is The content in this section is supplied by GlobeNewswire for the purposes of distributing press releases on behalf of its clients. Postmedia has not reviewed the content. by GlobeNewswire Article content

Hole 399: 4.60 m of 503 g/t Silver

Sign In or Create an Account

or View more offersArticle content

Hole 408: 7.00 m of 290 g/t Silver including 2.00 m of 958 g/t Silver

Article contentWe apologize, but this video has failed to load.Try refreshing your browser, or
tap here to see other videos from our team.Article content

VANCOUVER, British Columbia, Sept. 02, 2026 (GLOBE NEWSWIRE) — Brixton Metals Corporation (TSX-V: BBB, OTCQX: BBBXF) (the “Company” or “Brixton”) is pleased to report additional silver results from 33 holes at its wholly owned Langis Silver Project, located in the historic silver mining camp of Cobalt, Ontario, Canada. The results reported herein extend mineralization approximately 50 m to the south within the Shaft 6 South East (S6-SE) zone, where hole LM-26-399 returned 41.00 m of 79.2 g/t silver, and include encouraging initial results from the Shaft 6 West (S6-W) area, where hole LM-26-401 returned 2.00 m of 447 g/t silver and mineralization is now confirmed around the historic mine workings. In the Shaft 6 (S6) area, hole LM-26-432 returned 1.00 m of 6,199 g/t silver from 116.05 m depth, including 0.50 m of 12,386 g/t silver. So far in 2026, a total of 33,858 m has been completed across 155 drill holes. Two rigs continue to operate at Langis, testing extensions of known mineralization.

Article content

Story continues below

This advertisement has not loaded yet, but your article continues below.

Article content

Highlights

Article contentArticle content

  • In the S6 area, hole LM-26-432 returned 1.00 m of 6,199 g/t silver from 116.05 m depth
    • Including 0.50 m of 12,386 g/t silver from 116.05 m depth
  • In the S6-SE area, hole LM-26-399 returned 41.00 m of 79.2 g/t silver from 208.00 m depth
    • Including 4.60 m of 503 g/t silver from 213.35 m depth
  • In the S6 area, hole LM-26-408 returned 7.00 m of 290 g/t
    silver from 123.00 m depth
    • Including 2.00 m of 958 g/t silver from 126.00 m depth
  • In the S6-SE area, hole LM-26-375 returned 5.00 m of 262 g/t
    silver from 182.00 m depth, within 19.00 m of 78.9 g/t silver from 172.00 m depth
  • In the S6-W area, hole LM-26-401 returned 2.00 m of 447 g/t
    silver from 111.00 m depth
    • Including 0.50 m of 1,735 g/t silver from 111.00 m depth

Article content

Chairman and CEO, Gary R. Thompson, stated, “Drilling at Langis continues to show strong silver results with hole LM-26-432 returning over 12 kilograms of silver per tonne. The disseminated native silver flanking the veins in holes like 399 suggests the mineralized envelopes are wider than the historic vein-only model implied. Our current strategy remains to expand known silver zones in and around the historic mine workings.”

Article content

Story continues below

This advertisement has not loaded yet, but your article continues below.

Article content

Figure 1. Langis Silver Project location map of drilling area.                

Article contentArticle contentArticle contentArticle content

Figure 2. Photograph of hole LM-26-432 at 116.36 m depth showing disseminated native silver and native silver veins-veinlets.

Article contentArticle contentArticle contentArticle content

Figure 3. Photograph of hole LM-26-432 at 116.36 m depth showing native silver veins-veinlets.

Article contentArticle contentArticle contentArticle content

Figure 4. Photograph of hole LM-26-399 at 243.75 m depth showing disseminated native silver and silver carbonate cobaltite veins.

Article contentArticle contentArticle contentArticle content

Discussion

Article content

Shaft 6 South East (S6-SE)

Article content

New results from this recently discovered brownfield area (Table 1), with no mining works (see news release dated, July 21, 2026), show the extension of mineralization to the south. Hole LM-26-399 was collared approximately 50 m south of previously reported hole LM-26-377. Both holes returned silver mineralization over intervals of tens of metres, demonstrating continuity of the vein system within the Shaft 6 South East (S6-SE) zone. As previously reported, hole LM-26-377 returned 20.00 m of 5,015 g/t silver from 165.00 m depth, including 14.00 m of 7,150 g/t silver, 1.15 m of 74,137 g/t silver and 0.65 m of 89,125 g/t silver. Hole LM-26-399 returned 41.00 m of 79.2 g/t silver from 208.00 m depth, including 4.60 m of 503 g/t silver from 213.35 m depth, as well as 7.90 m of 94.7 g/t silver from 241.10 m depth, including 0.55 m of 1,085 g/t silver from 243.15 m depth.